cut settings

Ready to cut your amazing new material? Get some settings to test here!

1st or 1,000th cut, doesn’t matter- always remember to test cut!

These settings are a starting point- always remember to test cut and adjust as needed!

PRODUCT

SILHOUETTE

CRICUT®

Graphtec CE5000-60

  • Material: Heat Transfer, Smooth
  • Blade : 2
  • Speed: 8
  • Force: 5
  • Set Material: Iron-On
  • Pressure: Default
  • Blade: Fine-Point Blade (Standard)
  • Offset: 0
  • Speed: 8
  • Force: 16

We use a 45° blade.

  • Material: Heat Transfer, Smooth
  • Blade : 3
  • Speed: 8
  • Force: 6
  • Set Material: Iron-On
  • Pressure: Default
  • Blade: Fine-Point Blade (Standard)
  • Offset: 0
  • Speed: 8
  • Force: 16

We use a 45° blade.

  • Material: Heat Transfer, Smooth
  • Blade : 3
  • Speed: 8
  • Force: 8
  • Set Material: Iron-On
  • Pressure: More
  • Blade: Fine-Point Blade (Standard)
  • Offset: 0
  • Speed: 8
  • Force: 20

We use a 45° blade.

  • Material: Heat Transfer, Smooth
  • Blade : 3
  • Speed: 8
  • Force: 6
  • Set Material: Iron-On
  • Pressure: Default
  • Blade: Fine-Point Blade (Standard)
  • Offset: 0
  • Speed: 8
  • Force: 17

We use a 45° blade.

  • Material: Heat Transfer, Smooth
  • Blade : 2
  • Speed: 8
  • Force: 6
  • Set Material: Iron-On
  • Pressure: More
  • Blade: Fine-Point Blade (Standard)
  • Offset: 0
  • Speed: 8
  • Force: 20

We use a 45° blade.

  • Material: Heat Transfer, Flocked
  • Blade : 6
  • Speed: 4
  • Force: 30
  • Set Material: Light Cardstock
  • Pressure: More
  • Blade: Fine-Point Blade (Standard)
  • Offset: 0
  • Speed: 8
  • Force: 30

We use a 60° blade.

  • Material: Heat Transfer, Smooth
  • Blade : 3
  • Speed: 8
  • Force: 7
  • Set Material: Iron-On
  • Pressure: Default
  • Blade: Fine-Point Blade (Standard)
  • Offset: 0
  • Speed: 8
  • Force: 16

We use a 45° blade.

PRODUCT

SILHOUETTE

CRICUT®

Graphtec CE5000-60

  • Material: Heat Transfer, Flocked
  • Blade : 4
  • Speed: 8
  • Force: 11
  • Set Material: Iron-On
  • Pressure: More
  • Blade: Fine-Point Blade (Standard)
  • Offset: 0
  • Speed: 8
  • Force: 22

We use a 60° blade.

  • Material: Heat Transfer, Smooth
  • Blade : 2
  • Speed: 8
  • Force: 5
  • Set Material: Iron-On
  • Pressure: Default
  • Blade: Fine-Point Blade (Standard)
  • Offset: 0
  • Speed: 8
  • Force: 16

We use a 60° blade.

PRODUCT

SILHOUETTE

CRICUT®

Graphtec CE5000-60

  • Material: Heat Transfer, Smooth
  • Blade : 2
  • Speed: 8
  • Force: 4
  • Set Material: Iron-On
  • Pressure: Default
  • Blade: Fine-Point Blade (Standard)
  • Offset: 0
  • Speed: 8
  • Force: 12

We use a 45° blade.

  • Material: Heat Transfer, Smooth
  • Blade : 2
  • Speed: 8
  • Force: 5
  • Set Material: Iron-On
  • Pressure: Default
  • Blade: Fine-Point Blade (Standard)
  • Offset: 0
  • Speed: 8
  • Force: 16

We use a 45° blade.

  • Material: Heat Transfer, Flocked
  • Blade : 6
  • Speed: 4
  • Force: 30
  • Set Material: Light Cardstock
  • Pressure: More
  • Blade: Fine-Point Blade (Standard)
  • Offset: 0
  • Speed: 8
  • Force: 28

We use a 45° blade.

  • Material: Heat Transfer, Smooth
  • Blade : 3
  • Speed: 8
  • Force: 6
  • Set Material: Iron-On
  • Pressure: Default
  • Blade: Fine-Point Blade (Standard)
  • Offset: 0
  • Speed: 8
  • Force: 14

We use a 45° blade.

  • Material: Heat Transfer, Smooth
  • Blade : 2
  • Speed: 8
  • Force: 6
  • Set Material: Iron-On
  • Pressure: Default
  • Blade: Fine-Point Blade (Standard)
  • Offset: 0
  • Speed: 8
  • Force: 12

We use a 45° blade.

  • Material: Heat Transfer, Smooth
  • Blade : 3
  • Speed: 8
  • Force: 14
  • Set Material: Iron-On
  • Pressure: More
  • Blade: Fine-Point Blade (Standard)
  • Offset: 0
  • Speed: 8
  • Force: 23

We use a 45° blade.

  • Material: Heat Transfer, Smooth
  • Blade : 3
  • Speed: 8
  • Force: 12
  • Set Material: Light Cardstock
  • Pressure: Default
  • Blade: Fine-Point Blade (Standard)
  • Offset: 0
  • Speed: 8
  • Force: 23

We use a 45° blade.

  • Material: Heat Transfer, Smooth
  • Blade : 3
  • Speed: 8
  • Force: 7
  • Set Material: Iron-On
  • Pressure: Default
  • Blade: Fine-Point Blade (Standard)
  • Offset: 0
  • Speed: 8
  • Force: 16

We use a 45° blade.

  • Material: Heat Transfer, Flocked
  • Blade : 4
  • Speed: 8
  • Force: 11
  • Set Material: Iron-On
  • Pressure: More
  • Blade: Fine-Point Blade (Standard)
  • Offset: 0
  • Speed: 8
  • Force: 18

We use a 60° blade.

  • Material: Heat Transfer, Smooth
  • Blade : 3
  • Speed: 8
  • Force: 14
  • Set Material: Iron-On
  • Pressure: More
  • Blade: Fine-Point Blade (Standard)
  • Offset: 0
  • Speed: 8
  • Force: 23

We use a 60° blade.

  • Material: Heat Transfer, Smooth
  • Blade : 3
  • Speed: 8
  • Force: 14
  • Set Material: Light Cardstock
  • Pressure: Default
  • Blade: Fine-Point Blade (Standard)
  • Offset: 0
  • Speed: 8
  • Force: 25

We use a 45° blade.

  • Material: Heat Transfer, Smooth
  • Blade : 3
  • Speed: 8
  • Force: 20
  • Set Material: Iron-On
  • Pressure: More
  • Blade: Fine-Point Blade (Standard)
  • Offset: 0
  • Speed: 8
  • Force: 23

We use a 45° blade, except for  LF-4790 which we use 60°

  • Material: Heat Transfer, Smooth
  • Blade : 2
  • Speed: 8
  • Force: 4
  • Set Material: Iron-On
  • Pressure: Default
  • Blade: Fine-Point Blade (Standard)
  • Offset: 0
  • Speed: 8
  • Force: 10

We use a 45° blade.

PRODUCT

SILHOUETTE

CRICUT®

Graphtec CE5000-60

  • Material: Heat Transfer, Flocked
  • Blade : 3
  • Speed: 8
  • Force: 8
  • Set Material: Iron-On
  • Pressure: More
  • Blade: Fine-Point Blade (Standard)
  • Offset: 0
  • Speed: 8
  • Force: 16

We use a 45° blade.

  • Material: Heat Transfer, Flocked
  • Blade : 4
  • Speed: 8
  • Force: 11
  • Set Material: Iron-On
  • Pressure: More
  • Blade: Fine-Point Blade (Standard)
  • Offset: 0
  • Speed: 8
  • Force: 22

We use a 45° blade.

  • Material: Heat Transfer, Flocked
  • Blade : 3
  • Speed: 8
  • Force: 6
  • Set Material: Iron-On
  • Pressure: Default
  • Blade: Fine-Point Blade (Standard)
  • Offset: 0
  • Speed: 8
  • Force: 14

We use a 45° blade.

  • Material: Heat Transfer, Smooth
  • Blade : 2
  • Speed: 8
  • Force: 5
  • Set Material: Iron-On
  • Pressure: Default
  • Blade: Fine-Point Blade (Standard)
  • Offset: 0
  • Speed: 8
  • Force: 16

We use a 45° blade.