Description

Need a glitter you can PRINT on? Say hello to GlitterFlex® Printable™!

GlitterFlex® Printable™ is a printable glitter HTV that offers high-quality prints with a shimmering finish! That shimmer comes from real holographic glitter particles. This HTV can be sublimated, embroidered, or sublimated then embroidered. The possibilities are ENDLESS!

PLEASE NOTE: GlitterFlex® Printable™ is designed for use with all Solvent/Eco-Solvent inks. Please double check your printer before buying! DH White’s backing feels a bit rough but doesn’t affect printing on large format Solvent/Eco-Solvent printers.

Cut Settings

1st or 1,000th cut, doesn’t matter- always remember to test cut!

Print and cut right reading.

Please note- this material is intended for sublimation or with a solvent/eco-solvent printer that can take 19.5″ rolls. Please read the tech info below for more information, especially for transfer tips.

Use a 60° when cutting.

These settings are a starting point- always remember to test cut and adjust as needed!

Need more info? Printable here!

Perfectly sized for your 8 ½”  x 11″ printers! Simply open the PDF, save it, and print!

Pressing Info

Transfer Mask – Solvent printing, use Strong Mask. For sublimating, no mask needed!

Temp – 330°-335° F

Pressure – Firm, even with Teflon Sheet

Time – 15 seconds

Peel – Warm, use Teflon and re-press for 2 seconds.

Care – Wash inside out, gentle cycle, cold water. Tumble dry low

Applies to: Cotton, Uncoated Polyester, Fabric Blends, Wool, and Linen NO Nylon